SLIDE RAIL SUSPENSION TUNING I rgr I §Ill High Altitude Tuning High altitude specifications should be applied to operation at an altitude of more than 900 meters (3,000 ft). -------- Secondary gear ratio (3,500 tt)(STD) 1,000 m (3,000 - 5,000 tt) (4,500 - 6,500 tt) (6,000 - 10,000 tt) 900 - 1,500 m 1,350 - 1,950 m 1,800 - 3,000 m 18/33 (0.545) 17/33 17/35 16/35 (0.457) Part No. Drive gear Teeth 88F-17682-80 88F-17682-70 ~ 88F-17682-60 18 17 ~ 16 Part No. Driven gear Teeth 88F-47587-00 33 ~ 35 ~ ~ 88F-47587-20 ~ Part No. Chain No. of links 94860-01068 ~ ~ ~ 68 ~ ~ ~ SLIDE RAIL SUSPENSION TUNING The spring preload is a determining factor in machine stability.
Consider the course condition and the rider's weight when setting spring pre- load. The suspension should be set as soft as possible without imparing the stability of the machine. Stopper Band Setting 1.Adjust: • Stopper band length NOTE: ______________________ ___ This adjustment will affect the stability and maneuverability of the machine. Adjustment steps. • Remove the stopper band CD securing bolt ® and washers. • Adjust the length of stopper band. Standard Setting: Front IAl : No.3 hole Rear [§J: No 1 hole 2-43 http://ReadManuals.com