________________ ST_E_E_R_IN_G_ICHASI..# I 2. Inspect: • Bearings (steering column) CD Wear/Damage ~ Replace. • Steering column ® (bearing contact surfaces) Scratches/Wear/Damage ~ Replace. 3. Inspect: • Relay rod CD • Tie-rod ® Bends/Cracks/Damage ~ Replace. AWARNING Do not attempt to straighten a bent rod. This may dangerously weaken the rod. 4. Check: • Tie-rod end movement Tie-rod end free play exists ~ Replace. Tie-rod end turns roughly ~ Replace. INSTALLATION Reverse the "REMOVAL" procedure. Note the following points. • Tie-rod CD • Relay rod ® NOTE: ______________________ _ 1.lnstall: • Install the rod end @ with left-hand threads onto the tie-rod on the right side .
• The threads on both rod-ends must be the same length. Lock nut (tie-rod end): 25 Nm (2.5 m • kg, 18 ft· Ib) LOCTITE® Nut (suspension bracket-tie-rod): 25 Nm (2.5 kg, 18 ft· Ib) 3-5 http://ReadManuals.com