Yamaha Exciter II-570 — Primary Sheave and Drive V-Belt

PRIMARY SHEAVE AND DRIVE V-BELT r?Ґr R 141 • Fit the primary sheave assembly onto the adapter, and secure the supporting plates@. NOTE: __________ _ Securely fit the projections of the adapter into the fixed sheave holes. • Set the bar wrench onto the spider and turn the special tool clockwise to loosen the spider . • Spider has a left-hand thread . • To loosen the spider, high torque is required so be sure that the spider, fixed sheave and special tool are placed securely. Loosen the spider carefully to prevent cracks and/or damage to the sheaves and spider. • Remove the fixed sheave @ , fixed sheave stopper @ , and sliding sheave ® from the spider (J). INSPECTION 1. Inspect:

• Spider (tapered portion) CD • Sliding sheave 00 • Fixed sheave @ • Primary sheave cap @ Cracks/Damage --+ Replace. 2. Measure: • Bushing-to-sheave clearance Out of specification --+ Replace bushing. Use a feeler gauge CD Bush clearance (primary sheave cap) [A] : t--.101 0.25 mm (0.01 in) Bush clearance (sliding sheave): 0.25 mm (0.01 in) IB.l : 4-4 http://ReadManuals.com