Yamaha Exciter II-570 — Primary Sheave and Drive V-Belt

I. POTWR RI ~ I PRIMARY SHEAVE AND DRIVE V-BELT UUlf ---------------------------------------------------------~~~--~-==-~ 3. Inspect: • Primary sheave spring CD Cracks/Damage --+ Replace. 4. Measure: • Primary sheave spring free length ® Out of specification --+ Replace. Primary sheave spring free length: 72.5 .. 78.5 mm (2.85 .. 3.09 in) 5. Inspect: • Weight CD • Roller ® • Bushing @ Slider@ • Rivet ® • Collar Wear/Scratches/Damage --+ Replace. Rivet replacement steps: • Remove old rivet with the appropriate drill. • Insert the rivet CD from the 10 mark ® side. Press or peen the rivet head sothatthe diame- ter of rivet head measures to 8.2 mm (0.32 in) or larger@. NOTE:

____________________ __ Refer to chart on 2-42 for rivet application. 6. Measure: • Bushing inside diameter (primary sheave cap) Out of specification --+ Replace. Bushing inside diameter (primary sheave cap): ...... -~ new: 28.0 mm (1.10 in) limit: 28.2 mm (1.11 in» 7. Measure: • Bushing inside diameter (sliding sheave) Out of specification --+ Replace. Bushing inside diameter (sliding sheave): t---~ new: 40.0 mm (1.57 in) limit: 40.2 mm (1.58 in» 4-5 http://ReadManuals.com