Yamaha Exciter II-570 — Primary Sheave and Drive V-Belt

PRIMARY SHEAVE AND DRIVE V-BELT ~R141 8 . Inspect: • Weight pin hole Excessive Wear/Damege ---) Replace. 9 . Inspect: • Roller collar hole Excessive Wear/Damege ---) Replace. 10. Measure: • Roller bushing inside diameter Out of specification ---) Replace as a set. Roller bushing inside diameter: new: 8.0 mm (0.31 in) limilt: 8.2 mm (0.32 in» 11.Measure: • Weight bushing inside diameter Out of specification ---) Replace as a set. Weight bushing inside diameter: new: 8.0 mm (0.31 in) limilt: 8.2 mm (0.32 in» ASSEMBLY Reverse the "DISASSEMBLY" procedure. Note the following points. 1. Install: • Sliding sheave (onto spider) NOTE:

______________________ __ Be sure the sliding sheave match mark (x) is aligned with the spider match mark (x). • Fixed sheave (onto spider) NOTE: ______________________ ___ 2. Install: Apply LOCTITEQ!) CD to the first 4 threads of the spider. 4-6 http://ReadManuals.com