I POWTRRI~ I SECONDARY SHEAVE UUH --------------------------------------------------------- 3. Inspect: • Secondary sheave spring CD Cracks/Damage ~ Replace. 4. Measure: • Torsion spring free length ® Less than specification ~ Replace. Free length limit: 82 ... 86 mm (3.23 ... 3.38 in) 5. Measure: • Ramp shoe thickness ® Out of specification~Replace. ~ We.r romit: ;.0 mm (0.04 in) ASSEMBLY Reverse the "DISASSEMBLY" procedure. Note the following points. 1. Lubricate: • Bushing surface (thin coat) Recommended Grease: Esso Beacon 325 grease or Aeroshell grease #7 A • Secondary sheave spring CD NOTE: ______________________ ___ 2. Install:
Hookthe end of the secondary sheave spring onto the spring hole in the sliding sheave. Standard spring position: Position" A" 3. Install: • Spring seat CD NOTE: ________________________ _ Hook the end of the secondary sheave spring onto the spring hole in the spring seat. Standard spring position: Position "2" 4-13 http://ReadManuals.com