I POTWRRI~ I SECONDARY SHEAVE UUH --------------------------------------------------------- Installation steps: • Slide thewasher and circlip onto the boltofthe Sheave Compressor (-, YS-28891) CD , and then attach the compressor to the secondary sheave. Always use a new circlip. • Turn in the screw for the sheave compressor so that the spring seat splines engage with the fixed sheave splines. NOTE: ______________________ _ Turn in this screwto a position where the spring seat cam CD does not come in contact with the sliding sheave cam ® . ® • Tu rn the sliding sheave the specified deg rees, in the counterclockwise direction. • Holding the sliding sheave and fixed sheave in this position.
Standard twist angle: 50· • Turn in the screw for the sheave compressor so that the spring seat engages with the slid- ing sheave. • Install the washer and circlip in proper posi- tion. INSTALLATION Reverse the uREMOVAL u procedure. Note the following points. 1. Lubricate: • Splines (fixed sheave) Recommended grease: Esso beacon 325 grease or Aero shell grease #7 A 2.Tighten: Secondary sheave bolt: 60 Nm (6.0 m • kg, 43 ft • Ib) 3. Adjust: • Sheave distance • Sheave offset • Free play (clearance) 4-14 http://ReadManuals.com