Yamaha Exciter II-570 — Secondary Sheave

SECONDARY SHEAVE 1~141 SHEAVE DISTANCE AND OFFSET ADJUST- MENT 1. Measure: • Sheave distance ® Use the Sheave Gauge (-,YS-91047). Out of specification 4 Adjust. Sheave distance: 267 ... 270 mm (10.5 ... 10.6 in) 2. Adjust: • Sheave distance Adjustment steps: • Check the engine mounting bracket, dampers and frame for bend, crack and weathering. Repair or replace as required. • Loosen the engine mounting nuts CD . • Adjust the position of the engine so that the sheave distance is within the specification with the crankshaft and juckshaft parallel to each other. • Tighten the engine mounting nuts CD. Mounting nut: 40 Nm (4.0 m . kg, 29 ft . Ib) 3. Measure:

• Sheave offset @ Use the Sheave Gauge (-, YS-91047). Out of specification 4 Adjust. Sheave offset: 14.5 ... 17.5 mm (0.57 ... 0.69 in) 4. Adjust: • Sheave offset Adjustment steps: Apply the brake to lock the secondary sheave . • Remove the bolt (secondary sheave) and secondary sheave CD . 4-15 http://ReadManuals.com