Yamaha Exciter II-570 — Secondary Sheave

SECONDARY SHEAVE 1~141 • Adjust the sheave offset by adding or removing shim (s) ® . Adding shim CHfset is increased. Removing shim Offset is decreased. Shim size Part Number Thickness 90201-252F1 0.5 mm (0.02 in) 90201-25527 1.0 mm (0.04 in) 90201-25526 2.0 mm (0.08 in) • Install the secondary sheave and bolt (secon- dary sheave). I® Bolt (secondary sheave): 60 Nm (6.0 m • kg, 43 ft Ib) • Recheck the sheave offset. If out of specifica- tion, repeat the above steps. NOTE: When adjusting the sheave offset, the secon- dary sheave free play (clearance) should be adjusted. 5. Measure: • Secondary sheave free play (clearance) © . Use a feeler gauge. Out of specification ~ Adjust.

Secondary sheave free play (clearance): t-- olIioI 0.5 .. 1.0 mm (0.02 .. 0.04 in) 6. Adjust: • Secondary sheave free play (clearance) Adjustment steps: Apply the brake to lock the secondary sheave. • Remove the bolt (secondary sheave CD and washer® . Adjust the secondary sheave free play (clearance) by adding or removing a shim(s) @. 4-16 http://ReadManuals.com