Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Warming-up Operation 3 - 59 NOTICE When th e hydraulic oil is at a low temperature , do n ot carry ou t operation s or move the lever sud denly. Always carry out the warming -up operation. This will help to exten d the machine lif e. operation is completed. more than 20 minutes. Do not s uddenly accelerate t he engine before the w arming-up operation i Do not r un the engine at low idle or high idle continuously for more than After starti ng the engine, do not immediately start operation s. First, perform th e following operat ions and check 1.

Pull fu el control lever (1 ) from low idle (positi on A) to midway positio n (B) between full speed and low idle to raise the engine speed to a mid-range sp eed, then run under n o load for approx. 5 min utes. REMARK When the ambient temperat ure is below 0° C (32° F), keep the fuel control le ver close to the up operation. 1/4 position when carrying out the warming- 2. Set lo ck lever (2) to the FREE position (F), a nd raise t he bucket Machine e quipped with can Machine e quipped with cab REMARK For machi nes equipped with a cab, there is only a lock leve r on the left.