. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS problem is found, contact your Komatsu operated. swing does not move when the boom swing 3 - 60 3. Operate right wo rk equipment control le ver (3) slowly, pull the bucket in to the s top position, and hold i t there for 5 minute 4. After carrying ou t the w arming-up oper ation, check tha t each gauge an is found, Engin correc Fuel g Engin Charg gauge an d monit or is in the following co ndition. If any p roblem is found, carry ou t maintenance and re Engin e coola correc t range Fuel g auge (5 ): Indicator is in correc Engin e oil pre ssure monitor (6): Mon Charg e level monito r (7): Monitor is 5.
Check fo r abnor distributo 6. Set lock l ever (2) to the LOCK position ( L), then check t hat the machine does no t move even when the levers and pedals are operated 1) The work eq uipmen t and swing do not move when the left and r ight wor k equipment control le vers are operated. 2) The machine does not travel when the left and righ t travel lever s are op erated 3) The b If any 4) The contr ol pedal