Komatsu — MACHINE OPERATION

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS (PAGE 5-2)". the work the 3 - 64 When the machine is traveling at high speed, tr avel s peed boo monitor (5) lights u For details of the tr avel speed values , see "SPECIFICATION REMARK s started, the travel speed is automatically set to low speed. high speed, if the machine travels on soft ground or up a slope and the load increases, the When the engine i s started, the trave l speed i s automatically set to low spe When traveling at high speed, if the machine travel s on soft ground or up load i ncrease travel is automatic ally switched to low speed t ravel, so there i s no need to o perate the switc h.

Th e travel s peed boost monitor disp lays stays lighted u p. system returns to high speed travel. When the load is r educed, the travel system r eturns to high s 5. Check that the tra vel alarm sounds. If the alarm does not sounds, please contact your Komatsu distributor for Moving Machine B 1. Set lock lever (2) the equipment 40 to 5 0 cm (16 to 20 in) from the groun 2. Raise the blade. travel levers (3) as explained below. (A) is at the rear of the machine. l levers (3) backward slowly to move 3. Opearate the both travel levers (3) a s explained be low. When the sprocket (A) is at the rear o f the machine. Pul l