Komatsu — MACHINE OPERATION

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS to move the machine off. is (PAGE 5-2)". 3 - 65 When the sprocket (A) is at the front o f the machi slowly 4. Switch the travel speed as follows. el speed selector s witch (4) is pressed, th When the trav witch travel speed ca n be switched between high s peed and lo speed. Each time the switch is pressed, the travel speed en low speed and high speed. switched betwe en low speed and high speed. When the machine is traveling at high speed, trave l speed boo monitor (5) lights u For details of the tr avel speed values, see "SPECIFICATION REMARK s started, the travel speed is automatically set to low speed.

high speed, if the machine travels on soft ground or up a slope and the load increases, the When the engine i s started, the trave l speed is a utomatically set to When traveling at high speed, if the machine tra vels on soft groun d or up a slop ncrease travel is automatic ally switched to low speed trav el, so there i s no need to operate the switch. Th e travel s peed boost monitor disp lays stays lighted u p. system returns to high speed travel. When the load is r educed, the travel system retu rns to high s peed t 5. Check that the tra vel alarm sounds. If t he alarm does not sounds, please contact yo ur Komatsu distributor for repair