Komatsu — RUBBER SHOES AND ROAD LINERS

. OPERATION MACHINE OPERATIONS AND CONTROLS Using Rubber Shoes and Road Liners 3 - 86 Prohibited Works Do not carry out the following types of work. Carrying out operationsand steering on crushed rock, extremely rough hard rock, steel beams, scrap iron, or near the edges of steel plates will cause damage to t he rubber shoes and road liners. arge numbers of large and small boulders, the stones may get d liners or make the shoes come off. If dozing operations are l reduce the life of the rubber shoes and road liner.

In places such as river beds where there are l caught and damage the rubber shoes and roa carried out when the shoes are slipping, this wil Be careful not to get oil, fuel, or chemical solven t on the rubber shoes and road liners. If such a substance shold get on the shoes, remove it immediately. Furth ermore, do not travel on road surfaces where oil has collected. When putting the machine into long-term stora protected from direct sunlight or rain. ge (3 months or more), store the machine indoors where it is Do not use the machine in high-temperature are as, such as areas where there is burning wood, steel plates that have been left under the hot sun, or places whe re asphalt has been laid.

Do not move the machine with the crawler on on e side raised using the work equipment. This will cause damage to the rubber shoes and may cause the rubber shoes to come off. When the rubber parts of the road liner are so w orn or broken that the head of the mounting bolts are scratched, replace the shoe immediately. If the bolt heads are broken, the bolt cannot be removed. When installing road liners, always install them to all links on both sides. If they are installed to only one part of the links, their durability will be greatly reduced. Long Life Operations t work. crete surfaces.

There is danger that the concrete surface will Be careful of the following points when carrying ou Avoid carrying out counterrotation turns on con scrape off the rubber from the shoe. Avoid making sudden changes in direction. This may cause premature wear or damage to the rubber shoes and road liners. Avoid operating the steering when traveling over places where there is a big difference in height. When traveling over obstacles or places where there is a differ to prevent the shoes from coming off. ence in height, drive the machine at right angles to the obstacle t, lower it slowly. oil when crushed (soy beans, corn, or remains of vegetables e.

dhesion of the steel core, such as salt, ammonium sulphate, ium superphosphate; or wash the machine after use. lt, so avoid using the machine in coastal areas. ns, if there is any deep cut in the rubber shoes and road liners, If the machine has been raised using the bucke Avoid doing work with materials that produce squeezed for oil); or wash the machine after us Avoid handling materials that will attack the a potassium chloride, potassium sulphate, or calc The adhesion of the core will be attacked by sa When handling salt, sugar, wheat, or soya bea these substances may get into the lugs or cut p ortion of the rubber. Always repair the rubber before use. ainst walls or concrete embankments.

Do not carry out work that involves scraping ag Rubber shoes and road liners slip extremely eas ily on snow or frozen roads. Be careful not to slip when traveling or working on slopes. The properties of rubber shoes and road liner s change when working in extermely cold places, and this will rs. bber shoes within a range of -25°C to +55°C (-13°F to +131° d liners within a range of -25°C to +65°C (-13°F to +149°F). reduce the life of the rubber shoes and road line Because of the properties of rubber, use the ru F). Because of the properties of rubber, use the roa When carrying out bucket operations, be careful not to damage the rubber shoes and road liners with the bucket.