Komatsu — RUBBER SHOES AND ROAD LINERS

. OPERATION MACHINE OPERATIONS AND CONTROLS always travel at right angles to the object. the the 3 - 87 Alway s maintain the rubb er shoes at the prope r tension to preven If the tension is low, the r ubber shoes will com e off under Even if the tension is corr ect, be extremely car eful when c arrying out 1. Avoi d operating the stee ring when traveling o ver curbs, r ocks, aces where there is eight (more than ects, 2. Whe n traveling in revers e up a slope, do not t urn when m oving from If it i flat ground onto the slope. on slopes, be sure to turn gradually. s necessary to turn on slopes, be sure to turn gradu 3.

Avoi d traveling along th e edge of slopes or on rough gr ound with angl side road flat g the track on one sid e raised (with the ma chine tilting at an e of more than appr ox. 10°) and with the t rack on the other on flat ground. To a void damage to the r ubber shoe s and liners, travel with th e tracks on both side round. 4. If th e machine is operat ed as explained in 1 to 3 above rubb posi er shoes is slacken ed. Do not steer the machine i gure. tions shown in the fi