Komatsu — DRAIN WATER AND SEDIMENT FROM FUEL TANK

. MAINTENANCE MAINTENANCE PROCEDURE CLEAN WATER SEPARATOR ELEMENT WARNING DRAIN WATER AND SEDIMENT FROM FUEL TANK 4 - 26 Do not bring any fir Prepare a filter wrench Prepare a cont ainer to catch the fuel tha 2. Set handle (1 ) of the water separator to CLOSED position (A 3. Loosen drain container unti plug (2). plug (2) and drain the accumulated water into l red ring (3) reaches the bottom. Then tight 4. Use a filter wr then remove ench to loosen ring (4), ta element (6). ke out element cup (5 the cup. Be careful no t to lose red ring (3) inside 5. Wash the insi de of cup (5) and elemen t (6) with diesel fuel flushing oil. , install element (6). 6. After washing 7.

Insert red ring (3) in element cup (5), fill with fuel, then install the filter hold Tightening to the filter hold er and tighten ring (4). rque: 14.7 to 19.6 N·m (1. 14.5 lbft) 5 to 2.0 kgf·m, 10.8 Tightening to 8. Set handle (1 ) of the water separator to OPEN position (B). 9. After washing the water separator, blee For details o Bleeding (PA NOTICE Never use trichle ne for washing the inside of the tank. Use diesel fue l only. Carry out this pro cedure before operating t he machine. t is drained. Prepare a cont ainer to catch the fuel tha 1. 2. 3. 4. 1. Swing the upp er structure so that drain v alve (1) is between th tracks. 2. Open the eng ine rear cover and cooling cover.

For details, se "COOLING C OVER (PAGE 3-29)". sediment and wat e fuel. uel on yourself. n drain valve (3). 3. Open drain valve (1) and drain the collected at th e bottom together with th When doing t his, be careful not to get f 4. When only cl ean fuel comes out, tighte