Komatsu — CHECK AND ADJUST TRACK TENSION (MACHINE EQUIPPED WITH ROAD LINER,STEEL SHOE)

. MAINTENANCE MAINTENANCE PROCEDURE Loosening Track Tension WARNING 4 - 29 Increasing Track Tens Prepare a g rease p 1. Pump in grease through gre ase fitting (2) with a g rease pump. 2. To chec k that t he correct te nsion has been achie ved, run the engine at low id le, move the machine slowly forwa rds (7 to 8 m (23.0 to 26.3 ft) ), then stop the machine. 3. Check t he track tension aga in, and if t he tension i s not correct, adjust it 4. Continu e to pu mp in grease until dimension (S) b ecomes zero (0) . If t he ten sion is still loose, th e pin and bushing are excessively wo rn, so they must be e ither turned or replaced. Please contact your Komat su distributor for repai rs.

It is extremel y danger ous to release the greas e by any meth od except the If track tensi on is not relieved by th is procedure, contact yo 1. Loosen plug (1 ) gradually to release t he grease. e turn. 2. When l oosenin g plug (1), tu rn it a maximum of on 3. If t he gr ease do es not com e out smoothly, move the machine forward s and b ackwards a 4. Tighten plug (1 5. To chec k that t he correct te nsion has been achie ved, run the engine at low id le, move the machine slowly forwa rds (7 to 8 m (23.0 to 26.3 ft) ), then stop the machine. 6. Check t he track tension aga in, and if t he tension i s not correct, adjust it again.