Komatsu — CHECK AND ADJUST TRACK TENSION (MACHINE EQUIPPED WITH ROAD LINER,STEEL SHOE)

. MAINTENANCE MAINTENANCE PROCEDURE If the track tension is not at the standard value, adjust it in the following manner. Adjustment WARNING 4 - 28 CHECK AND ADJUST TRACK TE (Machin e equipped with ro ad liner, ste The wea r of the pi ns and bushings on the undercarriage w ill vary with the working conditions an d type of s oil, so inspect t he track te nsion fr equently in order to maintain the standard tensi Stop the machine on firm, horizontal gr ound when c arrying out the inspect ion and Checkin 1. Run nce equal to the l ength of trac k on ground , then st op the hine. 2. Cho ose woode n block (3) that will r each from idl er (1) to carrier (2), then place it on top of the 3.

Mea sure the m aximum deflection he rack and t he botto m surface of the wooden andard de flection eflection "a " shoul d be 5 to 15 mm (0.197 t o 0.6 in) There is d anger of plu g (1) flyi ng out under th e high interna l pressur e of the grease. N ever loosen plug (1) more than 1 t Never loo sen any pa rt other mounting direction o f plug (1) If the trac k tension c annot b please co ntact your K omatsu distributor.