. MAINTENANCE MAINTENANCE PROCEDURE CHECK, CLEAN AND LUBRICATE CAB SLIDE DOOR RAIL AND ROLLER (Machine equipped with cab) Cleaning Greasing LUBRICATING Prepare a grease gun 1. Using a grease gun, supply grease to the grease fitting is 4 - 41 Checking When opening or closing the slide door, if it is clogged with mud When lide ogged mud and does not mov e freely, clean an d supply greas e to roller (2) and rail (1) of the slide door. 1. Open and clo se the door, a nd use a br ush to remove any dirt from rail 2. Use a cloth to wipe off any dirt from rai NOTIC Do not use high-vis cosity oil for th e lubricant. U se grea se only 1. Spray rail (1) and roller (2) thoroughly with lu bricant. 2.
After spraying with lubrican t, slide the door a nd check tha t the doo r opens and closes If t he movem ent is not smooth, contac t your Komatsu distributor fo Boom swing cylin der foot pin ( 1 place) 2. After greasing , wipe off any old grease that was pushed out.