. MAINTENANCE MAINTENANCE PROCEDURE BLEEDING AIR FROM HYDRAULIC SYSTEM case with hydraulic oil, there is danger that the pump may be prematurely 4 - 42 NOTICE f the damaged . Be sure to bleed the air completely. 1. Bleeding air from pist on pump 1) ( 2) 1) Remove bolts (1) (M10 x 3), t hen remove triangula r cove 2). 2) Remove the oil fil ler cap from the hydrauli c oil tank 3) Loosen air bleed plug (3) and check that o il oozes out from the bleeder plug (co mpletion of air bleeding). PC27MR PC35MR 4) After completion of the air bleeding o peration, tighten the ai 5) Tighten the oil fill er cap of the hydraylic oil tank 6) I nsta ll the cover. 2. Star t the engine.
For details, see "STARTING ENGINE (PAGE Run the engine at low idle for 10 minute s, the n do as f ollows