Komatsu — REPLACE FUEL FILTER CARTRIDGE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL FILTER CARTRIDGE WARNING 4 - 49 The engin e is at hig h temperatu re immediate ly after t he machine has been operated. Wait for the e ngine to cool down before replacing t he filter. Do not bri ng fire or sparks near Prepare a filter w Prepare f or cloth 1. Open th e engin e rear cove r. he filter cartridge. 2. Spread the clot h beneath t 3. Set han dle (1) o f the water separator to CLOS ED positio n (A). 4. Using a filter wr ench, turn f ilter cartridg e (2) co unterclockwise 5. to remo ve it. , wipe it up immediately with a cloth. older, fill the new filter cartridge with fuel, then surface with fuel, and install to the filter holder.

If any fu Clean th coat the el spills e filter h packing , wipe it up i older, fill th surface wit mmediatel e new filter h fuel, and i y with a cartridg nstall to 6. When i surface a filter w nstalling contact rench t , turn to th s the seal s o tighten ap e right to ti urface of th prox. 1 turn ghten until the packing e filter holder, then use . Tighteni ng torq ue: 19.6 to 23.5 N·m (2 .0 to 2. 4 kgf· m, 1 4.5 to 17.4 lbft ) 7. Set han dle (1) o f the water separator t o OPEN position (B). 8. After re placing t he fuel filter element, b leed air For deta ils of th e procedure , see "Air B leeding (PAGE 4 -50)".