. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Bleeding Air (PAGE 3-54)" keep running the low NOTICE NOTICE before starting 6 - 15 Afte r connecting the piping, bleed the air from the circui 1. Starting engi Star t the eng "STARTING minutes, and carry out the fol lowing procedure the engine or 10 2. Bleeding air f Operate each cylinder 3 or 4 times to the end of its stroke If , at first, the engin e is run at high spe ed or the cylinder i s operated t o the end of its stroke, t he air inside the cylinder may cause damage t o the pisto n packing or othe 3.
Bleeding air f rom attachment (if equipped For machine equipped with a ttachment s actua blee d the air completely from the attachment c ircuit while running th e engine a t low idle. attachment pedal about 10 times to If the attachment bl eeding procedure is specified b y the manufacture , bleed the attachment according t o such procedure 4. 1) After com 5 minutes operation s. In this way, th e air bubble s are removed f rom the oi l insid e the hydraulic tank. 2) Check for any leakage of oil, and wipe off any o il that has been spilled