. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Top of pedal depressed: Oil flows to right side of arm (hydraulic tank side). seat side). adjust the oil flow, please ask your Komatsu attachment manufacturer. installed, it will cause overheating or other problems. SPECIFICATIONS Hydraulic Specifications Safety valve of service valve Cracking pressure 17.2 MPa (175 kgf/cm 2 , 2490 PSI) 6 - 17 When Using General Attachment Such as Crusher When the pedal is dep ressed, the attachment is actuated Bottom of pedal depre ssed:
Oil flows to l eft side o f arm (operator's REMARK If it is necessary to a If i t distributor to carry out Precautions when Usi ng Check that selector valve (1) is at the 2 WAY (crusher or other attachment) positio n (b). For details of pther precautions when handling the attachment, read and use corre ctly the instruction manual provided by the LONG TERM STO If t he machine is not t o be used for a lon g time, d o as follows. Install the cap to th e quick coupler. Set the selector val ve to the position for gener al attachments such Lock the attachmen t control pedal wit h the att achment lock cover. If t no attachment is PC27MR PC35M Max.
merging oil flow (Engine horsepower) 50 liters/min (2600 rpm) 70 liters/min (24