.
ATTACHMENTS AND OPTIONS CHANGING MACHINE CONTROL PATTERN (IF PATTERN CHANGE VALVE EQUIPPED) CHANGING MACHINE CONTROL PATTERN (IF PATTERN CHANGE VALVE EQUIPPED) WARNING the 6 - 18 When ch anging the operatin g pattern of the mac hine, set the machi ne in the parking posture, st op the engine, check t hat the lock leve r is at the LOCK po sition, then change t he operating patter To preve nt personal injury c aused by mistaken op eration, test operat e the machine and check tha t the display on the ope rating pattern c ard is the same as the movement of the If it is no t the same, replace the operating pattern card immediately with the card that matches t When ch ecking the movem ent of the machine, c heck carefull y that t he surrounding area is safe CONTROL PATTERN CHANGE PROC EDURE 1.
Open patter 2. Follow patter 1) Lo 2) Th or Po Po 1. Open the hatch at the n selector valve is e operating pattern changes when lever (2) is moved down. sition (A): ISO pattern sition (B): Backhoe position 3) Aft er switching, tigh ten hexagon socke t head bolt (1). that matches the selected operating pattern. 3. Chang e to an operating pattern card (inse rt it in the holder) that matches the selecte d operating pattern. 4. Start t he engine, set the lock lever to the F REE position, op erat e the work equipmen t levers slowly, and check that th e operating patte rn has changed.