Freightliner FLD Conventional — FLD Conventional

Transmissions speed. The ECM also controls HI and LO range se- lection in the auxiliary case on the rear of the transmission. 1 02/17/98 f270059 A. Press the top portion (engage the first position) of the shift-intent switch to begin an upshift. B. Press the top portion again (engage the second position) to break torque. 2 Fig. 8.20, ESS Upshifting Using the Shift-Intent Switch 02/17/98 f270058 1. Shift-Intent Switch 2. System Switch The system switch ( Fig. 8.19 ) is the lower switch lo- cated on the driver’s side of the shift handle. It con- trols ESS system operation. When in the down posi- tion, the system is operating and the word ON is visible on the switch.

In the up position, the word OFF is visible, the system is not operating, and the transmission can be shifted manually. Fig. 8.19, ESS Shift Handle 02/17/98 A. Press the bottom portion (engage the first position) of the shift-intent switch to begin a downshift. B. Press the bottom portion again (engage the second position) to break torque. f270060 Fig. 8.21, ESS Downshifting Using the Shift-Intent Switch The shift-intent switch ( Fig. 8.19 ) is the upper switch on the driver’s side of the shift handle. It has four positions and controls upshifting and downshifting by communicating to the ECM the driver’s intention of changing gears. Starting the Vehicle 1.

Ensure that the shift lever is in the neutral (N) position. NOTE: If the system switch is OFF, use the shift-intent switch to select between ranges. Push the top of the switch ( Fig. 8.20 ) to select the HI range on upshifts and the bottom of the switch ( Fig. 8.21 ) to select the LO range on downshifts. 2. Push the clutch pedal to the bottom of its travel to engage the clutch brake. 3. Start the engine. 4. Slowly release the clutch pedal. 5. Allow the system air to build up to the range specified on the gauge. WARNING 6. Release the parking brake. Make sure that the transmission is in neutral (N) when you start the vehicle.

If the vehicle is started in gear, it will suddenly move forward or backward which could result in personal injury and damage to property and the transmission. 8.21 B B