Freightliner FLD Conventional — FLD Conventional

Rear Axles 01/19/95 f600306 Fig. 9.5, Interaxle-Differential Control the rear axle, so both axles turn together at the same speed. The LOCK position should be used when ad- ditional traction is needed. CAUTION Engage the lockout only when stopped or at slow speeds and never when the wheels are spinning. Do not operate the axles on dry pavement with the lockout engaged for prolonged periods. Use only when additional traction is needed under adverse road conditions. Disengage the interaxle differential lockout before shifting the axle to a higher range.

When the interaxle differential lockout control valve is in the UNLOCK position, the interaxle differential al- lows differential action between the axles thereby compensating for different wheel speeds and varia- tions in tire size. Keep the interaxle differential lock- out in the UNLOCK position for normal driving on roads where traction is good. On 2-speed axles, the interaxle differential must be in the UNLOCK position before attempting to shift the axles out of low or high range. 9.4