Freightliner FLD Conventional — FLD Conventional

Vehicle Access Upper Bunk Access, 70-Inch Raised Roof SleeperCab Grab handles are designed into the upper cabinets on each side of the 70-inch raised roof SleeperCab. See Fig. 3.9 . There is a step built into the front of the passenger’s side lower cabinet. Also, a slip- resistant step pad is located on the top right corner of the driver’s side lower cabinet. 4 01/04/96 f540041a 1 Fig. 3.7, Circuit Breaker/Relay Panel 1 1 9 2 3 10 11 2 4 12 5 6 13 7 14 3 04/18/95 f600917 1. Passenger’s Side Grab Handle 2. Lower Cabinet Step 3. Lower Cabinet Step Pad 4. Driver’s Side Grab Handle 8 02/26/99 f542803 02/26/99 1. Trailer Marker Lights 2. Left Headlight/DRLs 3. Turn Signal Flasher 4. Voltmeter 5.

Ignition Switch 6. Horn/Cigarette Lighter 7. Brake Lights 8. Dome Lights 9. Trailer Tail Lights 10. Right Headlight 11. HVAC 12. Tractor Marker Lights/ Tail Lights 13. A/C Clutch 14. Panel Lights IMPORTANT: Make sure the upper bunk is folded down and locked into place before at- tempting to access the upper bunk. Fig. 3.9, Upper Bunk Access Fig. 3.8, Circuit Breaker Layout (detail) Accessing the Upper Bunk Using the Passenger’s Side Cabinets To open the sleeper access on vehicles with velour sleeper curtains, unfasten the snaps at one side, then push the curtain to the opposite side. 1. Grasp the passenger’s side upper cabinet grab handles, one in each hand.

Reach up as far as is comfortable. 2. Place your left foot in the step built into the pas- senger’s side lower cabinet, and pull yourself up to a standing position. 3.4