Freightliner FLD Conventional — FLD Conventional

Heater and Air Conditioner low speed, even with the fan control knob in the "Off" position. This prevents ice from forming on the evaporator, especially during humid weather. 2. If equipped with either the Red Dot constant tem- perature control (CTC ) system, or the Behr au- tomatic temperature control system, do the fol- lowing: 2.1 Turn on the cab air conditioner. For in- structions, refer to "Air Conditioning." 2.2 Turn the rotary knob on the temperature rheostat all the way counterclockwise to COOL. Turn the fan control knob to posi- tion 3.

2.3 When the sleeper compartment cools to the desired temperature, turn the rotary knob on the temperature rheostat clock- wise to adjust outlet air temperature. Then, turn the fan control knob to adjust the air flow level. The system will automatically maintain the selected outlet air temperature. 2.4 Whenever air conditioning is not desired, turn the rotary knob on the temperature rheostat clockwise (as needed) and turn off the fan. NOTE: Whenever the refrigerant compressor is operating, the fan will always run at a very low speed, even with the fan control knob in the "Off" position. This prevents ice from forming on the evaporator, especially during humid weather. 4.6