Seats and Seat Belts 6. Fore and Aft Seat or Seat Track Adjustment: The entire seat moves forward or backward when this adjustment is made. Height and Weight Adjustment There are 4 inches (102 mm) of ride zone motion plus 2 inches (51 mm) of height adjustment. Pull the lever up to raise the seat, and push the lever down to lower it. The seat should be no less than 2 inches (51 mm) from either the top or bottom position. 7. Weight Adjustment: On those seats with weight adjustment, the feature is fully automatic. By sit- ting on the seat, a leveling valve places you in the center of the ride zone. Additional adjust- ments are possible by using the height adjust- ment feature.
Seat Tilt Pull the lever up, and the back and bottom cushions may be moved forward or backward by shifting your weight. Bostrom Seat, Air–715 Series (Fig. 5.2) Back Cushion Tilt Bostrom Air–915 Seat (Fig. 5.3) Lumbar Support Adjustment By lifting the lever up, the back cushion angle posi- tion may be moved either forward or backward. Re- lease the lever to lock the back cushion in place. Move the lever forward to increase lumbar support. Move the lever rearward to decrease lumbar support. 5 1 1 4 2 3 5 01/18/95 f910033a 1. Seat Tilt Lever 2. Isolator Lockout Lever 3. Height and Weight Adjustment Lever 4. Back Cushion Tilt Lever 5. Lumbar Support Lever 2 04/16/96 f910146 3 4 Fig.
5.2, Bostrom Air-715E High Back Seat 1. Lumbar Support Adjustment Lever 2. Back Cushion Tilt Lever 3. Height Adjustment Knob 4. Fore and Aft Seat Adjustment and Isolator Lever 5. Seat Cushion Adjustment Lever Lumbar Support Move the lever forward or backward for more or less lower back support; there are three positions to choose from. Back Cushion Tilt Fig. 5.3, Bostrom Air-915 Seat Isolator Lockout Hold the lever rearward and lean forward or rearward to the desired position, then release the lever. To engage the isolator, put the lever in the center position. Lock it out by moving the lever to the right. 5.2