Seats and Seat Belts Height Adjustment Push the knob in to inflate the suspension and raise the seat height. Pull the knob out to deflate the sus- pension and lower the seat. 7 Fore and Aft Seat Adjustment Move the lever to the left and slide the seat forward or rearward to the desired position. The slide range is 6 inches (15 cm). 1 Isolator 4 3 2 Isolation is provided when the lever in the center po- sition. Move the lever to the right to lock out isola- tion. 2 3 4 5 6 Seat Cushion Adjustment 11/06/98 f910148a 1. Back Cushion Tilt Lever 2. Lumbar Support Control Switch 3. Damper Adjustment Knob 4. Height Adjustment Switch 5. Bottom Cushion Tilt Adjustment Knob 6.
Fore and Aft Seat Adjustment and Isolator Knob 7. Lumbar Support Knob Move the lever downward to decrease or upward to increase seat cushion tilt. There are five adjustment positions available. Bostrom Talladega 900 Seat (Fig. 5.4) NOTE: Two different sets of controls are used on Bostrom Talladega seats. On some models, the height adjustment, lumbar support and damper adjustment are controlled by switches mounted to the bottom cushion. On other models, these controls are mounted to the seat frame. Fig. 5.4, Bostrom Talladega 900 Seat Fore and Aft Seat Adjustment Hold the lever to the left and slide the seat forward or backward to the desired position.
Bottom Cushion Tilt Adjustment Back Cushion Tilt Rotate the knob to increase or decrease bottom cushion tilt. To tilt the back cushion, lean forward slightly to re- move pressure from the cushion and hold the lever rearward. Lean backward slowly to the desired posi- tion and release the lever to lock the cushion in place. Lumbar Support To increase lumbar support on LSO models, press the plus sign on the control switch. To decrease lum- bar support on LSO models, press the minus sign on the control switch. To increase lumbar support on non-LSO models, rotate the knob forward. To de- crease lumbar support on non-LSO models, rotate the knob rearward.
Height Adjustment To raise the seat, push the top portion of the switch. To lower the seat, push the lower portion of the switch. Damper Adjustment Isolator Rotate the knob or push the switch to adjust the damper. To engage the isolator, put the lever in the center position. Lock out the isolator by moving the lever to the right. 5.3