Seats and Seat Belts National Cush-N-Aire Seats, Model 195 (Fig. 5.9) Back Cushion Tilt 1 2 To tilt the back cushion through a range of 12 de- grees, turn the knob and lean forward or backward. 02/09/95 f910002a 1. Fore-and-Aft Seat Adjustment Lever 2. Isolator Lockout Handle 6 Fig. 5.7, Seat Adjustment Height Adjustment 1 2 Push the air button to raise the seat; pull the air but- ton to lower the seat. See Fig. 5.6 or Fig. 5.8 . 5 3 4 02/09/95 f910071a 1. Back Cushion Tilt Knob 2. Isolator Lockout Handle 3. Height Adjustment Knob 4. Fore and Aft Seat Adjustment Lever 5. Front Bottom Cushion Height Handle 6. Lumbar Support Knob Fig.
5.9, National Cush-N-Aire Seat Isolator Lockout f910037 05/30/2006 Called a Chugger-Snubber , the isolator is locked out by moving the handle down. Fig. 5.8, Air Button Front and Rear Bottom Cushion Height Height Adjustment To adjust the height of the front of the bottom cush- ion, lift the handle, and pull up and forward to one of three settings. To adjust the height of the rear of the bottom cushion, rotate the handle clockwise to one of the three settings. Push in the knob to inflate the suspension and raise the seat height. Pull out on the knob to deflate the suspension and lower the seat height.
Fore and Aft Seat Adjustment Fore and Aft Seat Adjustment Move the lever to the right and slide the seat forward or backward to the desired position. Move the lever to the right, and slide the seat. Locked-in settings are in 1-1/2 inch (38 mm) incre- ments. See Fig. 5.6 or Fig. 5.7 . Front Bottom Cushion Height To adjust the height of the front of the bottom cush- ion, lift the handle, and pull forward or push back to the desired setting. 5.5