Freightliner FLD Conventional — FLD Conventional

Seats and Seat Belts Lumbar Support Bottom Cushion Front Height Turn the knob for precise fit. To adjust the height of the front of the bottom cush- ion, lift the handle, and pull forward or push back to the desired setting. National Cush-N-Aire II Seat (Fig. 5.10) Back Cushion Tilt Lumbar Support To tilt the back cushion, turn the knob and lean for- ward or backward. Push the rocker switch on the side of the seat up to inflate lumbar support. Push the rocker switch down to deflate lumbar support. Back-of-Cushion Height To adjust the height at the back of the cushion, rotate the lever to the desired setting.

Isolator Also called a Chugger-Snubber , the isolator is locked out by moving the handle down. 6 7 1 Dura-Form Seats (Fig. 5.11) NOTE: Some vehicles may be equipped with the Freightliner Power 6000 or nonpower 5000 seat available from Dura-Form. These seats offer air lumbar, infinite recline, a map pocket, a rear storage pocket, and a pen/glasses pocket. The Power 6000 seat offers 6-way power adjustment. 5 2 3 4 11/02/95 f910128 1. Back Cushion Tilt Knob 2. Lumbar Support Switch 3. Height Adjustment Switch 4. Fore and Aft Seat Adjustment Lever 5. Bottom Cushion Front Height Handle 6. Isolator Handle 7.

Back of Cushion Height Lever Back Cushion Tilt To tilt the back cushion through a range of 10 de- grees, push down on the handle. Move the back cushion to the desired position and release the lever. Height Adjustment Fig. 5.10, National Cush-N-Aire II Seat Push in the knob to inflate the suspension and raise the seat height. Pull out on the knob to deflate the suspension and lower the seat height. Height Adjustment To raise the seat, push the rocker switch on the side of the seat up until the seat reaches the desired height. To lower the seat, push the rocker switch down until the seat reaches the desired height.

Isolator Lockout and Fore-Aft Seat Adjustment Move the lever to the left to adjust the seat to the desired fore-aft position. Move the lever to the center position to lock out the isolator feature. Move the lever to the right to engage the isolator. Fore and Aft Seat Adjustment Move the lever to the left and slide the seat forward or backward to the desired position. 5.6