Seats and Seat Belts 5 1 2 1 7 8 3 3 4 2 4 5 02/09/95 f910003a 6 1. Back Cushion Tilt Handle 2. Height Adjustment Knob 3. Isolator Lockout and Fore-Aft Adjustment Lever 4. Seat Cushion Adjustment 5. Lumbar Support Lever 10/26/95 f910142 1. Lumbar Support Adjustment Knob (vertical) 2. Armrest Angle Adjustment 3. Back Cushion Tilt Knob 4. Height Adjustment Lever 5. Isolator Lever 6. Fore and Aft Seat Adjustment Lever 7. Air Ride Control Adjustment Knob 8. Lumbar Support Adjustment Knob (front to back) Fig. 5.11, Dura-Form Fleetcruiser Seat Seat Cushion Adjustment To put the seat cushion in the upper position, lift up- ward on the front of the cushion then push rearward.
To put the seat cushion in the lower position, pull for- ward and then push downward. Fig. 5.12, Eldorado Seat Height Adjustment Lift up the lever and add or remove body weight to adjust seat height to the desired position, then firmly push the lever down into locking position. Lumbar Support Rotate the lever on the right side of the back cushion to any of the three positions as desired. Air Ride Control Adjustment Eldorado Seat (Fig. 5.12) Back Cushion Tilt Depress the air valve knob until the seat cushion is level. (Height adjustment should be made prior to air ride control adjustment.) To tilt the back cushion through a range of 15 de- grees, turn the knob and lean forward or backward.
Lumbar Support Adjustment/Front to Back Isolator Turn the knob clockwise to increase lumbar support. Turn the knob counterclockwise to decrease lumbar support pressure. Called the Glide-A-Lator , use the lever to engage or lock out the fore-and-aft isolator. Lumbar Support Adjustment/Vertical (Optional) Fore and Aft Seat Adjustment Use the lever to move the seat forward or backward to the desired position. Move the knob up or down to one of five positions for desired area of back support. 5.7