Engines and Clutches be thrown off the disc. Flying debris could cause injury to persons in the cab. See Group 25 of the Heavy-Duty Trucks Service Manual for clutch adjustment procedures and specifi- cations. Engaging the Clutch While Coasting Engaging the clutch while coasting can result in tre- mendous shock loads and possible damage to the clutch, as well as to the entire drivetrain. CAUTION Operating the vehicle with incorrect free pedal could result in clutch damage. Reporting Erratic Clutch Operation Promptly Clutch brake squeeze is an increased resistance (greater than the force of the clutch spring) felt as the clutch pedal approaches the end of its stroke.
If the gears grind when shifting into first or reverse gear with the clutch pedal fully depressed, the clutch is out of adjustment or the clutch brake is worn and needs to be replaced. Reporting erratic clutch operation as soon as pos- sible will give maintenance personnel a chance to inspect and lubricate the clutch components, make necessary internal clutch and linkage adjustments, etc. Clutch free pedal is a decreased resistance felt at the top of the clutch pedal stroke. See Fig. 7.11 . With the clutch pedal in this range, the clutch is fully engaged, and the only resistance to clutch pedal movement is the force of the return spring.
If clutch free pedal is 3/4 inch (20 mm) or less, measured at the pedal, have the clutch adjusted. Clutch Adjustments Clutches have an internal adjustment, and external linkage adjustment. See Group 25 of the Heavy-Duty Trucks Service Manual for clutch adjustment proce- dures and specifications. CAUTION Operating the vehicle with the clutch improperly adjusted could result in clutch or clutch brake failure. Lubrication The release bearing and linkage should be lubricated at frequent intervals. See Group 25 of the Heavy- Duty Trucks Maintenance Manual for intervals and procedures.
CAUTION Failure to lubricate the release bearing and link- age as recommended could result in release bearing and clutch damage. A 02/09/95 f250148b A. Free Pedal Fig. 7.11, Clutch Free Pedal Free pedal should be included and commented on daily in the driver’s report since clutch free pedal is the maintenance department’s guide to the condition of the clutch and the release mechanism. 7.24