Models J08C-TP and J08C-TR ENGINE 3-10-7 1 page 1 2 OIL COOLER ELEMENT COVER 1. Oil cooler element cover 2. Regulator valve 3. Oil filter safety valve 4. Check valve for turbocharger 5. Oil cooler safety valve 1 3 4 5 SM3-J573A Fig. 14 OIL COOLER ELEMENT COVER DISASSEMBLING Remove the plug and remove each valve and spring from the oil cooler element cover. INSPECTION AND REPAIR NOTE: Before inspection, clean the metal parts using treated oil. 1. Inspect each part for damage or wear visually. If the damage or wear is excessive, replace the safety valve with a new one. 2. If the spring is flattened, replace the safety valve with a new one.
ASSEMBLING Install each valve and spring onto the oil cooler element cover and tighten the plug. Tightening torque: Regulator valve and safety valve: 250 - 350 kg·cm (18 - 25 lb·ft)