Hino J08C-TP, J08C-TR — LUBRICATING SYSTEM

1 page 1 Models J08C-TP and J08C-TR 3-10-6 ENGINE OIL COOLER ELEMENT DISASSEMBLING Remove the nut, and remove the oil cooler element from the oil cooler element cover. SM3-J705 Fig. 11 INSPECTION AND REPAIR NOTE: Before inspection, be sure to clean the oil cooler element oil passage using a commercial clean- ing agent. Carry out a pneumatic test for the oil cooler element. If defective, replace the oil cooler element with a new one. Test pressure: 6 kg/cm 2 (85.3 lb/sq.in.) Test time: 1 minute SM3-J554 Fig. 12 ASSEMBLING Tighten the nut and install the oil cooler element onto the oil cooler element cover. Tightening torque: 200 - 300 kg·cm (15 -21 lb·ft) SM3-J705 Fig. 13