1 page 1 Models J08C-TP and J08C-TR ENGINE 3-13-7 b. After immersing the element, rinse it in fresh solu- tion. SM3-J560 Fig. 10 5. DRY THE ELEMENT WITH AIR. 1. Dry the element after thoroughly draining off the so- lution. If time is limited, dry the element using a fan or air draft. Do not use compressed air or apply direct heat to it. The element will dry in about 3 to 4 days during the summer or in a heated room. 2. When using a drying oven, keep the temperature below 80˚C (176˚F). Do not use an electric light bulb to dry the element. SM3-J733 Fig. 11 6. INSPECT THE ELEMENT FOR DAMAGE USING AN INSPECTION LAMP.
After washing and drying the element, thoroughly inspect it in accordance with the instructions pasted on the ele- ment or the Owner’s and Driver’s Manual. Ensure that the filter paper is not torn and the packing is undamaged. SM3-J561 Fig. 12