1 page 1 Models J08C-TP and J08C-TR 3-14-2 ENGINE DISASSEMBLY 1. ACCELERATOR CONTROL MECHANISM 1. Remove the bolts from the bracket at the neck of the pedal q , then remove the accelerator pedal to- gether with the bracket. 2. Disconnect the accelerator cable w and throttle ca- ble e from the accelerator link lever. 3. Remove the clamping bolt and remove the accelera- tor link lever assembly r . 4. Remove the clamp at the bottom of the accelerator cable t , then pull the cable from the frame side, and remove the clamp fixing the cable to the frame. 5.
Tilt the cab, then remove the clevis pin connecting the fuel control lever of the injection pump and the cable end, then remove the accelerator cable. 6. Loosen the screw of the throttle control knob y , then loosen the link and remove the throttle cable after pushing it through to the rear of the instrument panel. FOR FD, FE FOR FF, SG SM3-J564 Fig. 2