Hino J08C-TP, J08C-TR — ENGINE OVERHAUL CRITERIA

1 page 1 Models J08C-TP and J08C-TR ENGINE 3-3-3 2. DECREASED OIL PRESSURE Check the oil pressure warning lap when the oil and cool- ant temperature is hot [about 80°C (176°F)]. a. If the warning lamp is lit, check the oil level. b. Check oil deterioration. If oil quality is poor, replace with a suitable grade oil. c. Remove the oil pressure switch and install the oil pressure gauge. d. Measure the oil pressure at oil temperature 100°C (212°F). Standard oil Pressure: At 2,500 (rpm) 5.7 kg/cm 2 (81.05 lb/sq.in.) OIL SM3-J024 Fig. 4 Service Limit: At idle speed 0.5 kg/cm 2 (7.11 lb/sq.in.) Fig. 5 3. OTHER FACTORS a. Blow-by gas increases. b. Engine does not start easily. c.

Engine output decreases. d. Fuel consumption increases. e. Engine makes greater noise. f. Excessive oil consumption. S.A.E. GRADE ATMOSPHERIC TEMPERATURE -10 0 32 50 70 90 100 ˚F -23 -18 0 10 21 32 39 ˚C 40 30 20W/20 15W/40 10W/30