Hino J08C-TP, J08C-TR — DISMOUNTING THE ENGINE ASSEMBLY

1 page 1 Models J08C-TP and J08C-TR 3-4-2 ENGINE 5. OVER-TILT THE CAB NOTE: Refer to CAB in CHAPTER 19. 6. DRAIN THE COOLANT AND ENGINE OIL. WARNING To avoid the danger of burns do not drain the en- gine oil and coolant while the engine and radiator are still hot. 1. Drain the coolant from the radiator. (Fig. 7) NOTE: The coolant can be drained more easily by removing the filler cap. 2. Drain the coolant from the cylinder block. (Fig. 8) Coolant capacity: 21 L (22.19 US qt) 23 L (24.30 US qt) (with transmission oil cooler only) 3. Drain the engine oil through the drain plug. Engine oil capacity: 13.5 L (14.27 US qt) 7. DISCONNECT THE POWER STEERING LINES AT THE GEAR UNIT. NOTE:

Place a container under the gear unit. 8. DISCONNECT THE PARKING BRAKE CABLE (2). 1. Remove the bracket behind the cab, then pull out the parking brake cable. NOTE: Pull out the cable straight and slowly. If pulled out forcefully, the gasket will crack. Cracked cables must be replaced with new ones. OVER-TILTING POSITION NORMAL POSITION SM3-J585 Fig. 6 OPEN CLOSE DRAINING PLUG DRAINING PLUG SM3-J705B Fig. 7 Fig. 8 DRAINING PLUG SM3-J791 Fig. 9 SM3-J58 7 Fig. 10 Fig. 10 SM3-J589