Hino J08C-TP, J08C-TR — DISMOUNTING THE ENGINE ASSEMBLY

1 page 1 Models J08C-TP and J08C-TR ENGINE 3-4-3 9. DISCONNECT THE SPEEDOMETER CABLE AT THE TRANSMISSION. Fig. 12 10. REMOVE THE TRANSMISSION CONTROL ROD TOGETHER WITH THE BRACKET AT THE TRANSMIS- SION. 11. REMOVE THE CLUTCH SLAVE CYLINDER. 1. Remove the connecting clip of the clutch hose. 2. Remove the return spring and the clevis of the lever. 3. Remove the slave cylinder together with the lines. 12. DISCONNECT THE POWER STEERING LINES AT THE PUMP. NOTE: Be careful of oil leakage from the removed lines at the gear unit 13. DISCONNECT THE AIR HOSES WHICH CONNECT THE AIR CLEANER AND ENGINE. 14. REMOVE THE SPLASH BOARD. 15. REMOVE THE AIR CLEANER TOGETHER WITH THE BRACKET. Fig.

16 SM3-J5 90 SM3-J796 Fig. 13 SM3-J593 Fig. 14 SM3-J594 Fig. 15 g. 15 SM3-J595