Hino J08C-TP, J08C-TR — REMOVAL OF THE ENGINE COMPONENT PARTS

1 page 1 Models J08C-TP and J08C-TR ENGINE 3-5-1 REMOVAL OF THE ENGINE COMPONENT PARTS 1. PREPARATION 1. Loosen the coolant drain cock of the oil cooler, then discharge coolant. 2. Loosen the oil drain plug of the oil filter, then dis- charge oil. SM3-J606 Fig. 1 3. Clean the engine assembly. a. Cover openings with tape. b. Clean the engine assembly with a steam cleaner. NOTE: Do not apply steam directly to the electrical com- ponents. (Alternator, starter, etc.) 4. Mount the engine assembly on a work stand. SM3-J504 Fig. 2 2. REMOVE THE POWER STEERING OIL PUMP. SM3-J607 Fig. 3 3. REMOVE THE STARTER. 1. Put alignment marks on the harness and the starter terminal, then remove the harness. 2.

Remove the starter from the engine. Fig. 4 SM3-J608 4. REMOVE THE FUEL FILTER AND FUEL LINES. Remove the fuel lines, oil lines and fuel leakage lines. NOTE: G Cover openings to prevent foreign matter from enter- ing. G Refer to page 3-12-1. Fig. 5 SM3-J609