1 page 1 Models J08C-TP and J08C-TR 3-6-6 ENGINE DISASSEMBLING REMOVE THE CAM IDLER GEAR. 1. Remove the cam idler gear. SM3-J628 Fig. 12 2. Using the special tool, remove the cam idler gear. Special tool: Sliding hammer (09420 - 1830) SM3-J629 Fig. 13 DISASSEMBLE THE VALVE SYSTEM. 1. Using the special tool, press fit the valve spring seat upper, then remove the valve spring retainer. Special tool: Valve spring press (09470 - 1170) SM3-J060 Fig. 14 2. Remove the valve spring seat upper, valve spring outer and inner. 3. Remove the intake and exhaust valves from the cyl- inder head. NOTE: IN EX G Do not remove the valve guide and valve spring seat lower unless they need to be replaced.
G Align the removed parts in the order of the cylinder No. SM3-J061A Fig. 15