1 page 1 Models J08C-TP and J08C-TR 3-8-8 ENGINE 3. Tighten the mounting bolts of the main idler gear shaft to the specified torque below. Tightening torque: 1,750 kg·cm (127 lb·ft) 5. MEASURE THE TIMING GEAR BACKLASH Using a dial gauge, measure the backlash between the gears. If the backlash exceeds the limit, replace the gear. CAMSHAFT GEAR INJECTION PUMP GEAR CAM IDLER GEAR SUB IDLER GEAR POWER STEERING OIL PUMP GEAR GEAR MAIN IDLER GEAR CRANK SHAFT GEAR SM3-J136A Fig. 23 Unit:
mm (in.) Inspection item Standard Limit Crankshaft - Main idle 0.030 - 0.132 (0.0012 - 0.0051) 0.30 (0.0118) Main idle - Injection pump 0.030 - 0.218 (0.0012 - 0.0085) 0.30 (0.0118) Injection pump - PS pump 0.030 - 0.183 (0.0012 - 0.0072) 0.30 (0.0118) Main idle - Sub idle 0.030 - 0.162 (0.0012 - 0.0063) 0.30 (0.0118) Sub idle - Oil pump 0.030 - 0.131 (0.0012 - 0.0051) 0.30 (0.0118) Sub idle - Cam idle 0.050 - 0.218 (0.0020 - 0.0085) 0.30 (0.0118) Cam idle - Cam 0.030 - 0.253 (0.0012 - 0.0099) 0.30 (0.0118)