OPERATION COOLING FAN REVERSE ROTATION SWITCH This feature is not used on Waste Handler applications This switch (23) is used to rotate the cooling fan in the reverse direction when cleaning the radiator. Position (a): ON The pilot lamp inside the switch and the cooling fan reverse rotation pilot lamp on the machine monitor light up. At the same time, “COOLING FAN REVERSE” is displayed on the character display, and the fan is set to rotate in reverse. Position (b): OFF The cooling fan is set to rotate in the normal direction. Stop the engine before operating the switch. Switching normal rotation to reverse rotation: With the engine stopped, do as follows:
Ignition switch “ON” reverse rotation switch “ON” check machine monitor ignition switch “START” fan reverse rotation Switching reverse rotation to normal rotation: Engine at low speed ignition switch “OFF” ignition switch “ON” reverse rotation switch “OFF” ignition switch “START” fan normal rotation For details, “CLEANING RADIATOR FINS” on page 3-37. Remark When the engine is running, even if the switch is pressed, the direction of rotation of the fan does not change, but the cooling fan reverse rotation pilot lamp on the machine monitor flashes. Use the reverse rotation of the fan only for cleaning. For normal operations, rotate the fan in the normal direction.
If operations are carried out with the fan rotating in the reverse direction, the machine will not display its full function and will tend to overheat. DIRECTIONAL SELECTOR SWITCH This switch (24) is used to switch the machine direction of travel between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as follows. Directional lever is at N Directional selector switch actuation switch is at “ON” If the condition is not as above, the switch will not work. For details, “CHANGING DIRECTION” on page 2-93. 2-42 WA480-5L