OPERATION E.C.S.S. SWITCH If the machine is traveling or the work equipment is raised, the moment the E.C.S.S. switch is turned “ON”, the work equipment will move. If operations are performed with the E.C.S.S. switch at the “ON” position, the moment the E.C.S.S. switch is operated, the work equipment may move. Never turn on the E.C.S.S. switch during inspection or maintenance. The work equipment will move and this will create a dangerous situation. Always stop the machine and lower the work equipment to the ground before operating the E.C.S.S. switch. When performing an inspection and maintenance, first lower the work equipment to the ground, then turn the E.C.S.S.
switch “OFF” before starting the inspection and maintenance operation. When carrying out leveling work, turn the E.C.S.S. switch “OFF”. This switch (21) is used to turn the E.C.S.S. “ON” and “OFF”. Position (a): “ON” The pilot lamp lights up and the E.C.S.S. is actuated. Position (b): “OFF” The E.C.S.S. is not actuated. Remark The E.C.S.S. is a device that uses the hydraulic spring effect of an accumulator to absorb the vibration of the chassis during travel and allows the machine to travel smoothly and at high speed. When traveling in 1st, the E.C.S.S. is not actuated. When the speed range is 2nd to 4th, and the travel speed becomes more than 5 km/h (3.1 mph), the E.C.S.S.
is automatically actuated; when the travel speed goes below 3 km/h (1.9 mph), it is automatically disengaged. EMERGENCY STEERING SWITCH This switch (22) is the manual control switch for the emergency steering. Even when the engine has stopped, steering operations are made possible by pressing this switch. Position (a): ON The pilot lamp inside the switch and the emergency steering pilot lamp on the machine monitor light up and it becomes possible to operate the steering. When the switch is released, it automatically returns to its original position.
Actuate the emergency steering only in cases of emergency or when checking the function.The maximum operating time for continuous emergency steering is 60 seconds. When using emergency steering, travel at a speed of less than 5 km/h (3.1 mph). For details, see “EMERGENCY STEERING” on page 2-100. WA480-5L 2-41