OPERATION CIGARETTE LIGHTER This is used to light cigarettes. After the cigarette lighter (18) is pushed in, its element will heat up and return to its original position after a few seconds. Pull it out and light your cigarette. CAB LAMP SWITCH The switch (19) is used to turn the cab lamp “ON” and “OFF”. Position (a): OFF Position (b): Lights up when the cab door opens Position (c): Lights up Remark The cab lamp lights up even when the main switch is “OFF”, so when leaving the operator's compartment, turn the switch to position (a) (OFF) or (b). When operating with the cab door fully open, set the switch to position (a) (OFF).
REAR DEFROSTER SWITCH When this switch (20) is pressed, electric current flows through the heated wire glass at the rear and the mist is removed from the glass. Position (a): “ON” (removes mist from glass) Position (b): “OFF” 2-40 WA480-5L