Komatsu — REAR WIPER SWITCH

OPERATION HOLD SWITCH To set the speed range when traveling in automatic transmission, press switch (15) at the side of the left arm control lever knob. The transmission will be set in the speed range displayed on shift indicator (A) on the machine monitor and shift hold pilot lamp (B) will light up. When the switch is pressed again, the display goes out. Use this function to select the desired speed range when traveling up or down hills or when performing operations such as grading. Remark When the torque converter is in the lock-up condition (if equipped), the transmission cannot be set.

When canceling the shift hold, operate the directional lever or gearshift lever or operate the transmission shift mode selector switch to MANUAL. It is also possible to cancel the hold shift by turning the ignition switch “OFF”. FRONT WIPER SWITCH When the rotary switch (A) of this switch (16) is turned, the front wiper will move. If button (B) is kept pressed, washer fluid will be sprayed out on to the front glass. Position (a): (OFF) stop Position (b): (INT) Intermittent wiper Position (c): Low-speed wiper Position (d): High-speed wiper REAR WIPER SWITCH When lever (C) of this switch (17) is turned, the rear wiper will move. Position (a): Washer liquid is sprayed out Position (b):

OFF Position (c): Wiper is operated Position (d): Washer liquid is sprayed out, wiper is operated. WA480-5L 2-39