Komatsu — SEAT BELT

OPERATION ACTIVE SAFETY FEATURES Active safety features are safety devices that must be used by the operator in order to be effective. Failure to use these installed features may lead to serious injury or even death. When performing maintenance or transporting the machine, always lock the safety bar. Always remove the safety bar for general travel operations. If it is not removed, the steering wheel will not be able to turn the machine. This situation is extremely dangerous. SAFETY BAR The bar locks the front frame and rear frame to prevent the machine from bending during normal travel or when servicing or transporting the machine.

SEAT BELT The seat belt is installed to keep the operator in the seat within the cab of the machine if the machine is ever in a rollover situation. Always use the seat belt when operating the machine. It is important to inspect this component for ware or damage. If the belt is worn or dam- aged, replace it immediately. Even if there appears to be no abnormality with the seat belt, replace it once every three years. Remark The date of manufacture of the seat belt is marked on the belt at the place indicated by the arrow in the diagram on the right. Check that the bolts that connect the seat belt to the machine are not loose. Tighten if necessary. Tightening torque:

24.5 ± 4.9 N·m (18.1 ± 3.6 lb. ft.) 2-70 WA480-5L