OPERATION SLOW BLOW FUSE If the power does not come on when the ignition switch is turned “ON”, the slow-blow fuse may be blown. Check and replace it, if it is blown. The slow-blow fuse is beside the engine on the left side of the machine. 1. 120 A: Heater relay (electrical intake air heater) 120 A: Main power 2. 30 A: Battery power (ignition switch, hazard) AUXILIARY POWER There are two power sources: 12 V and 24 V. Check the voltage of the electrical equipment and select the appropriate power source. Mistaken use, such as using 24 V as the power source for 12 V equipment, will cause equipment fail- ure.
When using the electric power source, do not install any equipment which will exceed the maximum amperage. After removing the cigarette lighter (1), the lighter socket can be used as a 24 V power source. Maximum amperage: 9 A (216 W) Electric power source (2) can be used as a 12 V power source. Maximum amperage: 10 A (120 W) 2-74 WA480-5L